ReluxNet 数据表

KNX occupancy detector with integrated
KNX bus coupler, especially for
installation in walls
1 x light output (for regulating or
switching), 1 x slave output, 3 x HVAC
outputs (separately programmable)
Intelligent semi-automatic mode,
occupancy-independent regulating mode
(photoelectric switch), full automatic
mode
Two logic modules
Individual adaption of the PIR sensor
sensitivity
Measuring of mixed light thanks to
internal light sensor
Temperature sensor
Various locking functions
Status LEDs can be activated /
deactivated
Programming button (phys. address) can
be operated via remote control
Regulation/switching of three light
groups via offset (external influence
possible)
Short presence, self-adjusting
follow-up time, corridor function
Recall of light scenes
Integrated downlight with the function
of an orientation or a night light
Integrated pushbutton (two functions
programmable)
HVAC mode (1=comfort, 2=stand-by,
3=economy, 4 = antifreeze/heat
protection)
5 button remote control, programmable
at choice (accessory)
Occupancy simulation
Detection area can be extended thanks
to master-slave-mode
Extensive optimization options for
light measurement
Measured light value is communicated to
the bus
IR remote control-capable via IR remote
control (optionally)
PIN code
Manual influence via external KNX push
buttons possible
Function control (heartbeat, cyclical
sending)
Forced switch-off
Intelligent central-off function
Premonition of switch-off
Behaviour upon bus voltage return
definable at choice
Variable safety pause after switching
off the lights
Settings ex ETS 4 for integration in
KNX systems
The product database for import into
the ETS database can be downloaded from
the B.E.G. homepage.
Adaption of dimming curve
Determination of the reflection factor,
e.g. on a desk, with the optional
BLE-IR-Adapter
Burn-in function for fluorescent lamps
selectable from 1h till 100h
Soft-start
In combination with centre plates
usable with current frame systems of
various manufacturers
B.E.G. frames and centre plates for
combination with other frame systems
available
Please order cover frame separately,
available in various colours
corridors/hallways, underground car
parks, entrance halls, staircases,
toilets, equipment rooms




Voltage: via KNX BUS

Dimensions: (covering not included) 70
x 70 x 51 mm

typ. power input: 24 mA

Detection area: horizontal 120° (Wall
mounting)

Range: max. 8 m across max. 3 m towards


Monitored area (tangential movement):
67 m² / 1.1 m mounting height

Mounting height min./max./recommended:
1 m / 1.2 m / 1.1 m

Degree / class of protection: IP20 /
Class III

Temperature measurement range: -5 °C
to +45 °C

Ambient temperature: -25 °C to +55 °C


Housing: polycarbonate, UV-resistant

Number of light sensors: 1

Number of PIR sensors: 1

KNX TP 256: Yes

Orientation light: 5 – 100 % / OFF /
1 min – 255 min

Night light: 5 – 100 %

Brightness set value: 5 – 2000 Lux

Product without accessories